Tires/Tubes

- Shim adds support to Presta stem used in a Schrader rim

The Mezcal XC Race is built using a new XC Race Formulation and has been torture tested at the UCI elite levels. The Race Formulation employs Graphene and Silica, providing increased wet grip and suppleness, and combines a 60TPI tubeless ready casing to optimize deformation. This combination has been shown to reduce rider fatigue while simultaneously increasing race-day reliability. The continuous center line maintains fast-rolling contact, and its offset extensions are siped to multiply the number of leading and trailing edges, propelling you up the trail on climbs and increasing bite while braking. The rear siping on the shoulder knobs runs parallel to the trail with variable widths and open trailing edges, so the Mezcal corners fast on hard, slippery surfaces – despite being such a fast-rolling tire. For climbing, cornering, or careening down hill, no tire cooks like the Mezcal. - Race Formulation: Graphene + Silica Compound provides speed and grip without compromise. Designed to be the absolute fastest option from point A to point B - 60 TPI Nylon Casing provides a supple feel with dependable nylon construction, providing reduced rider fatigue and increased race-day reliability. World Championship proven Tubeless-ready technology ensures easy inflation and dependable air retention - Hookless Compatible

The Peyote delivers World Cup level speed and confidence in a range of terrain thanks to its revolutionary new tread pattern. Positioned between Terreno and Mezcal, the tread features a low-profile alternating center ribbon designed to increase speed and grip. The familiar Vittoria v-formation used in the Peyote allows the tire to dig through loose terrain to find traction while evacuating debris laterally. The alternating mid-tread tapers up to capable cornering tread, providing responsive handling and a predictable feel. These traits work to boost cornering performance by placing effective edges directly opposing the path of cornering forces, regardless of lean or cornering angles. - Race Formulation: Graphene + Silica Compound provdes speed and grip without compromise. Designed to be the absolute fastest option from point A to point B - 60 TPI Nylon Casing provides a supple feel with dependable nylon construction, providing reduced rider fatigue and increased race-day reliability. World Championship proven Tubeless-ready technology ensures easy inflation and dependable air retention - Hookless Compatible

Super light at only 38g, the Tubo-ROAD-700c makes racing bikes even lighter. It's 70g lighter compared to a standard tube, a decisive success factor both over challenging long distances and when it comes to seconds. Suitable for disc and rim brake wheels.

GRAVEL Cannonball is a go-to gravel race tire for normal conditions. The tread pattern features a directional, tight-knit center tread that sheds dirt and debris to decrease rolling resistance, and side knobs for effective cornering traction. Cannonball is built for all-around gravel riders and racers. HOW IT WORKS - Center lugs are raised and ramped for rolling efficiency; the diamond-shaped lugs squeeze in for grip as they contact dirt, then back out to shed debris. - Transitions lugs are spaced out and vary in height to boost traction. - L-shaped side lugs dig in for grip while braking through corners, but roll quickly when off the brakes.

- Labeled Size: 26 x 4.0 – 4.8 - ISO Width: 100mm – 120mm - ISO Diameter: 559 / 26" MTN - Wall Thickness: 1mm - Valve length: 32mm - Shaft Type: Threaded - Valve Core: Removable - Weight: 580g

Updraft delivers responsive acceleration and sustained speed on gravel. It features a modern file center tread for speed and pronounced shoulder knobs for confident, tactile feedback in loose conditions and unpredictable corners. - Tubeless-ready casing prevents flats, boosts traction and comfort at low pressures - Fast compound provides low resistance for a fast-rolling tire - Light & Supple casing delivers a compliant ride with minimal weigh

- Low Lead Valve - ISO Diameter: 203 / 12.5 - ISO Width (mm): 57mm - Labeled Size: 12 x 2-1/4 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth

- ISO Diameter: 584 / 650b / 27.5" - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded

- ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Labeled Size: 27.5 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Schrader

- ISO Diameter: 622 / road / 29" - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Size: 29 x 1.9-2.3 - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable - Valve Shaft: Smooth

- Size: 700c x 23 – 25 - ISO Diameter: 622 / road / 29" - ISO Width: 23mm, 24mm, 25mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 125g (32mm), 126g (48 & 60mm), 128g (80mm)

- ISO Diameter: 622 / road / 29" - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth - Weight: 110g (23-25mm), 128g (28-32mm), 144g (35-43mm), 160g (40-45mm)

GRAVEL Whether your route covers rough roads or fast gravel, or even both in the same day, Washburn is built for the job. Its center slick provides awesome rolling efficiency on pavement and packed dirt, while the shoulder lugs take over in the turns, digging in for confidence in loose corners. HOW IT WORKS - Center tread is smooth to minimize rolling resistance and maximize speed. - Transition lugs are tightly spaced to provide progressive initial cornering traction. - Side lugs are spaced out to dig in while cornering and when riding over loose surfaces.

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

A new and improved Tubeless Sealant Injector syringe supports the needs of modern tire sizes and the higher volume fill of sealant required, for a flat-free riding experience. The larger volume 150ml injector makes application of sealant simple, with no mess or waste of sealant. - Larger 150ml volume gives you the ability to inject sealant into today’s higher-volume mountain, gravel, and road tires with a single fill - New easy press-on adapter presses directly onto Presta and Schrader valve stems for quick fills without threading or additional parts - Patent pending top-fill, drip-free system features a cross-slit valve in the fitting paired with a unique air-relief channel in the injector body allows a precise fill of well-shaken sealant from the top for a convenient set-up with zero mess - Hose plug included for hanging on your workbench or mess-free storage in your toolbox

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

Guaranteed Grip and Control In All Situations - Radial carcass allows for a larger contact patch and conforms to terrain yielding more grip, more comfort, and more control - Literally sticks to the ground as the tire deforms more precisely - Tread Pattern optimized for radial carcass: Many lugs for maximum grip and great durability - Control in all situations

G-ONE RS - Road speed with cyclo cross grip. Schwalbe´s fastest gravel tire. - Lowest rolling resistance in the G-One range - Maximum efficiency on light terrain, hard surfaces and asphalt - Braking and traction edges for front wheel and rear wheel thanks to scale-like tread pattern - Souplesse construction for smooth ride + high puncture protection under tough racing conditions - Race-oriented semi-slick race tire - PRO (Evo) line - 585g

The Ultimate Gravity tire! The iconic Magic Mary with radial carcass provides more contact area and even more grip. - Radial carcass allows for a larger contact patch and conforms to terrain, yielding more grip, more comfort, and more control - Strong shoulder studs and aggressive, open tread design provide maximum braking traction and cornering grip even in muddy terrain - Equipped with V-Groves specially developed for Magic Mary, every stud can bite into the ground for even more grip - Angled studs in the middle of the tread optimize the rolling characteristics - TRAIL PRO version (Evo line) - Addix Ultra Soft compound - E-bike: E-50 - 1220g

OUTSTANDING FOR FAST AND DRY XC TRACKS. Its low weight and extremely low rolling resistance makes it Schwalbe’s fastest MTB tire! - Multiple small, flat studs for fast and quiet rolling. - Numerous grip edges for hard ground. - Edged shoulder studs for good grip and control in curves.

The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.

- Designed for Gravel, Adventure and Endurance - The tube provides all the benefits of the innovative TPU (Thermoplastic Polyurethane) and thanksto a specific formulation delivers the best performances for those looking for superior puncture resistance with low weight and compact size - Unparalleled puncture protection - Compatible with disc and rim brakes

- Polyurethane tube - Twice as strong as a regular butyl tube - Super lightweight - Very compact

- Patch Kit for Pirelli SmarTUBE - 10 Patches + Glue

Pasela is Panaracer's standard all around touring or urban commuting tire. Its comprehensive size range ensures that you can find a Pasela for most any usage. Ride it and trust it. - Steel (Wire) bead

Subzero tire sealant. It's formulated to maximize extreme frigid temperature; enabling riders in the far North to ride with flat protection. All while offering the same quick-sealing properties you’ve come to expect. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/4" with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients - Subzero sealant is developed for use in below-freezing conditions down to -20F

Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.

- A premium proprietary latex tire sealant formula featuring lightweight biodegradable ingredients; 119.6 grams for 4 ounces - Contains multiple shapes and sizes of solid particles called nanites which quickly seal holes up to 1/4 - Performs in varying

- The same tubeless valves, now with a Tire Insert air flow system - 6 slots machined into the base of the valve stem allow air to flow freely around tubeless tire inserts - Upgraded to aircraft grade 7075 aluminum valve stem and cap - 4mm machined Allen Key slot for easy installation/removal - Valve core removal tool integrated into valve cap - Includes multiple rubber bases to optimize fit with multiple rim types

The do-it-all trail tire - Aggressive, high-volume tread An aggressive tread in high-volume casing, designed with great traction in mind. The Ardent doesn't forget the racer with large block-style side knobs offering numerous edges for high-speed cornering. The center tread, while ideal for braking and accelerating traction, also features ramped knobs to minimize rolling resistance. With a wide variety of size offerings, the Ardent captures every mountain rider's needs.

The Aspen is a lightweight XC tire that is designed to roll fast and still provide enough traction to keep you going when the trail gets rough. - Low profile tread design rolls fast and still delivers grip for climbing and braking - Aggressive side lugs dig into soft terrain to provide additional cornering traction - Intended use: hardpack, loose over hard, medium - MaxxSpeed features a high-silica content compound that reduces rolling resistance while also enhancing wet traction - EXO casing provides protection on sidewalls for extreme cut and abrasion resistance while remaining lightweight and highly flexible - Team-spec tires feature a lighter, faster, and more supple 170 TPI casing for the lowest weight possible, with a reduction in durability

The Aspen ST is an ultra-low-profile race tire designed primarily for short-track XC use. Sometimes referred to as the "Fastpen," this tire is sure to give any racer an edge in dry conditions - Rubber: MaxxSpeed - Wide Trail (WT) sizes are optimized for 30mm inner width rims - Tubeless Ready (TR) - Category: XC Race - Recommended Uses: Dry XC Conditions - Recommendation Installation: Front or rear

The Aspen is one of Maxxis' premier XC race tires. A low center tread height allows the Aspen to roll quickly but substantial – for XC – side knobs provide cornering traction - Lightweight XC race tire - Features a high volume casing, low profile center and aggressive side knobs - EXO: additional densely woven, lightweight, flexible fabric added to casing for enhanced puncture protection - TR: tubeless ready - MaxxSpeed: new MaxxSpeed (2023) is a top-shelf rubber compound for XC racing. It’s a high-silica content compound which reduces rolling resistance while also enhancing wet traction - 170tpi casing - Compound: MaxxSpeed Silica - Bead: folding - Tire Type: tubeless ready - Weight: 650g. (29x2.25")

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

The Assegai tire is designed primarily for downhill racing and aggressive trail riding in mixed conditions. The knob height falls between the Minion DHR II and the Shorty. Like the Minion tires, the center knobs are heavily ramped on the leading edge to reduce rolling resistance. A small knob located between the center tread and side knobs provides a smooth transition while cornering. The Assegai offers predictable traction, even over slippery roots and rocks. - World Cup Champion Greg Minnaar's signature tire - EXO casing provides protection on sidewalls for extreme cut and abrasion resistance while remaining lightweight and highly flexible - Wide Trail (WT) construction optimizes the tire’s tread layout and profile on today’s modern, wider rims, optimized around a 35mm inner width

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

The original Forekaster was designed as a wet weather option for XC, while the new version is aimed squarely at modern short travel (100mm-130mm) trail bikes - aka the “downcountry” segment. Intended to be a “Goldilocks” tire, the new Forekaster rolls fast but also provides solid cornering and braking traction in a broad range of trail conditions.

The Maxxis Forekaster features a spiky, well-spaced tread pattern that is ideal for XC racing or light duty trail riding in loose or wet conditions during the spring and fall. Use as a front paired with an Aspen or Ikon rear for an “aggressive” XC setup.

The legendary High Roller returns with an all-new hybrid tread design, but the same old winning ways! Developed with extensive input and testing from Maxxis' World Cup athletes, the third generation of the High Roller is built to take on mixed conditions at high speeds - The third gen High Roller slots into the Maxxis gravity range between the Assegai and the Shorty - Widely-spaced tread clears debris better than the Assegai and it performs better in drier conditions compared to the Shorty - Built to take on mixed conditions at high speeds - Center tread uses a mid-spike design similar to the Shorty but with a lower knob height - Knobs provide excellent soil penetration in soft, loose, or dusty conditions while remaining stable enough to prevent squirm on hard surfaces - Cornering traction is enhanced via large, well-supported side knobs for predictable handling - A versatile choice when conditions are soft or loose, but don’t quite warrant a mud spike - All Maxxis tires 2.40" and up are considered WT according to Maxxis whether or not they are labeled WT - 3C MaxxGrip: the ultimate in grip and slow rebound properties for unparalleled traction in downhill applications - DD: Designed for Enduro racing and ebike use. Two layers of lightweight 120 TPI casing material are combined with a butyl sidewall insert to create a highly durable tire with more trail feedback than a Downhill casing tire - TR: Tubeless Ready means the ability to run lower pressures, improving traction, lowering rolling resistance, and less chance of flatting - Recommended installation: Front or rear - Tire Diameter: 29" - ISO Diameter: 622 / Mountain / 29er - Labeled Size: 29 x 2.4" - Casing: 60tpi - Max Pressure: 50psi - Bead: folding - Weight: 1,299g. (29 x 2.4")

The legendary High Roller returns with an all-new hybrid tread design, built to take on mixed conditions at high speeds. The center tread uses a mid-spike design similar to the Shorty but with a lower knob height. These knobs provide excellent soil penetration in soft, loose, or dusty conditions while remaining stable enough to prevent squirm on hard surfaces. Cornering traction is enhanced via large, well-supported side knobs for predictable handling. - Recommended for intermediate enduro and downhill conditions - Tubeless ready construction, designed for front or rear use - A versatile choice when conditions are soft or loose, but don’t quite warrant a mud spike - Widely-spaced tread of the High Roller clears debris better than the Assegai and it performs better in drier conditions compared to the Shorty - 3C MaxxGrip + Downhill casing is ideal for Downhill racing and long travel e-bikes - 3C MaxxGrip compound uses the stickiest, slowest rebounding rubber offered by Maxxis to provide lots of traction on the trail - Downhill casing tires are designed for extreme use in all gravity applications, made with two layers of durable 60 TPI casing material along with a large butyl rubber insert that extends from each bead into the sidewall

The Aspen is a lightweight XC tire that is designed to roll fast and still provide enough traction to keep you going when the trail gets rough. Low profile tread design rolls fast and still delivers grip for climbing and braking Aggressive side lugs dig into soft terrain to provide additional cornering traction Intended use: hardpack, loose over hard, medium MaxxSpeed features a high-silica content compound that reduces rolling resistance while also enhancing wet traction EXO casing provides protection on sidewalls for extreme cut and abrasion resistance while remaining lightweight and highly flexible Wide Trail (WT) sizes optimized for 30mm

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims - DH casing features 2 ply 60 TPI construction with a butyl reinforced sidewall for maximum durability With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Gravel and dirt road racing tire - Dual-Compound for longevity - Gravel-specific tread pattern - Tubeless Ready (TR) Maxxis' first gravel-specific tire, the Rambler, is designed with the volume you need for comfort and the tread you need for speed and control. Tightly packed center knobs are ramped for rolling efficiency on hardpack roads, and spaced-out side knobs provide predictable cornering in varied terrain.

- Low profile, tightly packed center knobs paired with well-spaced corner knobs make for a fast rolling tire ideal for gravel riding - The less aggressive height of knobs makes this a great multi-use tire suitable for grinding some gravel as well as light trail work - EXO-equipped models feature Maxxis` EXO sidewall protection, which helps prevent puncture from sidewall abrasions - HYPR-X- Gravel specific compound combining the best attributes of the HYPR Road and MaxxSpeed MTB compounds for better traction and lower rolling resistance

The Reaver tire is faster, lighter, and even more durable than the venerable Rambler. A low-profile tread design uses diamond knurling to reduce rolling resistance and enhance grip in dusty or loose conditions. Paddle knobs arranged in sets of three provide extra bite under hard braking. The side knobs are spaced closely together and are staggered for consistent cornering performance. A sipe (groove) in each of the side knobs allows them to flex and conform to the terrain, improving traction. - Race-ready tread design, intended to go fast on gravel and dirt - Tubeless-ready 120 TPI casing with EXO sidewall protection - Dual compound to maximize wear

The Reaver tire is faster, lighter, and even more durable than the venerable Rambler. A low-profile tread design uses diamond knurling to reduce rolling resistance and enhance grip in dusty or loose conditions. Paddle knobs arranged in sets of three provide extra bite under hard braking. The side knobs are spaced closely together and are staggered for consistent cornering performance. A sipe (groove) in each of the side knobs allows them to flex and conform to the terrain, improving traction. - Race-ready tread design, intended to go fast on gravel and dirt - Tubeless-ready 120 TPI casing with EXO sidewall protection - Dual compound to maximize wear

- Gravel tire with tightly spaced, diamond-shaped knobs, small horizontal center paddles and larger, more pronounced should knobs - Excels on dirt and gravel roads but is equally at home on pavement - HYPR-X- Gravel specific compound combining the best attributes of the HYPR Road and MaxxSpeed MTB compounds for better traction and lower rolling resistance - EXO-equipped models feature Maxxis` EXO sidewall protection which help prevent puncture from sidewall abrasions - TR - Tubeless Ready - sealant required

The Maxxis Rekon Race is a semi-slick XC race tire that features the lowest profile tread in our XC line. It is a great choice for dry XC trails and short track racing.

The Maxxis Rekon Race is a semi-slick XC race tire that features the lowest profile tread in our XC line. It is a great choice for dry XC trails and short track racing.

Aggressive plus tire inspired by the Ikon+ - 27.5+ tire - Designed for aggressive XC trails The Rekon+ is an aggressive trail tire inspired by the Ikon+ for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this you can race more and scout less with the Rekon+.