Other

38 Air Shaft Assembly for Fox suspension forks.

38 Air Shaft Assembly for Fox suspension forks.

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

If you're not looking for chain retention or your bike has an integrated chain guide, you can still add some bash protection with the OneUp ISCG05 Underbash. The Underbash includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T. Designed for frames with 2 ISCG05 tabs only (Evil, Rocky Mountain, etc). If your bike has three ISCG05 tabs, check with the frame manufacturer to ensure the lower tabs are strong enough for a bash application. Failure to do so could result in frame damage. FEATURES - Install without removing your crank - Single tool install and adjustment - Boost compatible - Oval Compatible - Stainless Steel hardware - Includes 3 bash plates (28-30T, 32-34T, 36T) SPECS - Weight: 68g 32-34T - Capacity: 28-36T - Chainline: 2.5mm adjustment - Mount: ISCG05 2-Bolt ONLY - Color: Black - Material: 7075 aluminum, glass reinforced thermoplastic

Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.

Replace old brake barrel adjusters with a fresh pair of Problem Solvers' 10mm Brake Barrel Adjuster. Designed for use with standard brake cables.

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts

The Problem Solvers Clamp-On Cable Hanger is made of light, durable anodized aluminum and fits on bicycles with 1- and 1 1/8-inch forks. A cable noodle and guide are included.

The Problem Solvers Center Lock Adapter Kit allows riders to use 6-bolt rotors on Shimano Center Lock compatible hubs. - Not intended to be used with rotors over 180mm in diameter - Made of extruded, CNC-machined, and broached AL-6061-T6 - Designed for use with Center Lock hubs and 6-bolt disc brake rotors

MisMatch adaptors allow users to mount Shimano & SRAM brakes and shifters on one clamp. Available in multiple configurations. -Annodized Black -Attaches SRAM shifters to Shimano I-Spec II brake lever clamps MisMatch 1.2 adaptor fits Shimano brakes: BL-M9020, BL-M9000, BL-M8000, BL-M7000

Profile Design's Gap Cap works with 1" or 1 1/8" steer tubes to keep your headset adjusted properly at all times. The composite wedges are a fantastic choice for carbon steerers, and at 30-45 grams, you'll keep the front end of your bike super light.

Aeffect Crank Stopper Kit for Race Face Aeffect cranks slows and stops the crank for no-footed tricks.

RockShox cable and hose guide.

RockShox cable and hose guide.

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

RockShox 32mm Seal Kit for repair and maintenance of Rockshox suspension forks.

RockShox 30mm Seal Kit

RockShox 30mm Seal Kit

RockShox 32mm Seal Kit for repair and maintenance of Rockshox suspension forks.

RockShox 32mm Seal Kit

RockShox 32mm Seal Kit

RockShox Volume Reducer Kits

RockShox Seal Head Assemblies

Eyelet Bushings for repair and maintenance of Rockshox rear shocks.

Metric Coil springs are available in many sizes and weight ratings, allowing riders to take full advantage of their shock's rebound and compression adjustments by dialing in the spring rate and setting the correct suspension sag. - Coil springs are available in many sizes and weight ratings - Each are available separately and are not included with aftermarket shocks

Upper and Lower Saddle Cradle Clamps, two bolts, and nuts for A1 and A2 generation RockShox Reverb dropper seatposts - Fits A1 (2010-2012) and A2 (2013-2016) generation seatposts - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle

RockShox Seal Head Assemblies

RockShox 35mm Seal Kit