Other

Torque caps increase the contact surface area between frame and fork resulting in a stronger and stiffer interface and more control. - Allows for easy installation on Rock Shox Torque Cap compatible forks

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

Parts for repair and maintenance of DT Swiss hubs.

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4

Small parts for Wolf Tooth ReMote.

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Alternator 1.0 Set Screws

Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings

Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.

Aeffect Crank Stopper Kit for Race Face Aeffect cranks slows and stops the crank for no-footed tricks.

Flat Mount Disc Caliper Bracket Bolts

Replace old brake barrel adjusters with a fresh pair of Problem Solvers' 10mm Brake Barrel Adjuster. Designed for use with standard brake cables.

RockShox cable and hose guide.

RockShox cable and hose guide.

- Grade 10 chromium steel balls

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

- Grade 10 chromium steel balls

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 15.4mm, for ratchet

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 41 and 42mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction

External adjusters and parts for Fox suspension fork service and repair.

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

- GX Eagle Rear Derailleur B-Bolt and Limit Screw Kit Hex5

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Brake Caliper Spacer Kit—203mm Rotor on 200mm Post Mount

Red eTap battery terminal cover

This replacement bolt unit ensures your I-Spec II shifters, dropper levers, and/or brake levers are securely fastened. Make sure your controls are ready to rip.

Featuring a tasteful TR logo, this top cap perfectly matches the graphics on all new Ritchey WCS stems for a clean, coordinated aesthetic. Compression bolt and plastic bolt cover are included. - Material: alloy - Includes top cap, bolt, and plastic cap - Fits 1-1/8" stems - Weight: 8g

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 18307 Bearing

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 3 Pawl Ring Nut

Set of six oversized pins. All dropper posts require key way clearance. With so many different frames, clamps and ride heights it's not possible to ship play-free without running the risk of binding. The kit is meant to remove additional play that might develop over time or, for the more mechanically inclined, to tune the play out for a specific bike. Start with the 3 pins marked with 2 lines. If play still exists move to the 3 pins marked with 4 lines.

Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

RockShox 32mm Seal Kit for repair and maintenance of Rockshox suspension forks.

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6803 Bearing

Compression plug for Wolf Tooth headsets. - Compression plug works with steerer tube inner diameters ranging from 23.2mm to 24.2mm

Air spring seal kits for Fox suspension repair and rebuild.

RockShox 30mm Seal Kit

RockShox 30mm Seal Kit for repair and maintenance of Rockshox suspension forks.

RockShox 32mm Seal Kit for repair and maintenance of Rockshox suspension forks.

Profile Design's Gap Cap works with 1" or 1 1/8" steer tubes to keep your headset adjusted properly at all times. The composite wedges are a fantastic choice for carbon steerers, and at 30-45 grams, you'll keep the front end of your bike super light.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

RockShox 32mm Seal Kit

RockShox 32mm Seal Kit

RockShox Volume Reducer Kits

RockShox Volume Reducer Kits

RockShox Seal Head Assemblies

Volume tuning kits for Fox rear suspension service and repair.

Eyelet Bushings for repair and maintenance of Rockshox rear shocks.

The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace

Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild

Upper and Lower Saddle Cradle Clamps, two bolts, and nuts for A1 and A2 generation RockShox Reverb dropper seatposts - Fits A1 (2010-2012) and A2 (2013-2016) generation seatposts - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle

Disc Brake Adaptors - Includes Stainless Bolts

Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts